Skip to content

CGPA to Percentage Calculator

Convert CGPA to percentage with CBSE, VTU, Mumbai University or Anna University formulas, or your own.

How this is calculated

Choose a conversion method, then enter your CGPA. The calculator applies that method's formula and shows the percentage to two decimals, with the working underneath. Switch to % → CGPA to go the other way.

CBSE: Percentage = CGPA × 9.5 VTU: Percentage = (CGPA − 0.75) × 10 Mumbai Univ.: Percentage = 7.1 × CGPA + 11 Anna Univ / 10-point: Percentage = CGPA × 10 4-point GPA: Percentage = GPA ÷ 4 × 100 Custom: Percentage = CGPA × multiplier

Example

A CGPA of 8.2 is 8.2 × 9.5 = 77.9% with the CBSE multiplier. The same CGPA is (8.2 − 0.75) × 10 = 74.5% under the VTU formula, 7.1 × 8.2 + 11 = 69.22% under the Mumbai University formula, and 82% with a plain × 10.

Common mistakes

  • Using one formula for every institution. The same CGPA can give different percentages under different methods, so use the one your board or university publishes.
  • Entering a 10-point CGPA while the 4-point method is selected. The calculator rejects a grade above the scale instead of converting it.
  • Treating the result as an official equivalent. It is a calculation from a formula; it is not a certificate.

About this calculator

Boards and universities do not share one conversion formula, so this calculator lets you choose the method and shows the exact formula it used, with your number substituted in. Tap a preset for CBSE (CGPA × 9.5), VTU ((CGPA − 0.75) × 10), Mumbai University (7.1 × CGPA + 11) or Anna University and the plain 10-point standard (CGPA × 10), choose a 4-point linear scale, or enter the multiplier your own institution publishes.

The table under the calculator converts every CGPA from 6.0 to 10.0 in half-point steps under all four formulas at once, so you can see how much the choice matters: a CGPA of 8.0 is 76% under CBSE, 72.5% under VTU, 67.8% under the Mumbai University formula and 80% with a plain × 10.

It can also run backwards, from a percentage to a CGPA, for the methods that can be reversed. If a method gives a result above 100% or below zero, or a percentage that would need a grade above the top of the scale, the page says so instead of showing the number quietly. The result is a conversion, not an official equivalence: confirm the formula with your institution before putting it on an application.

Frequently asked questions

What is the formula to convert CGPA to percentage?

There is no single universal formula. CBSE publishes a multiplier of 9.5 for its 10-point grades (percentage = CGPA × 9.5). VTU uses (CGPA − 0.75) × 10. Some institutions simply multiply by 10. This calculator offers each of these and a custom multiplier, and shows which one it applied.

Why does CBSE use 9.5 to convert CGPA to percentage?

CBSE's 10-point grades each cover a band of 10 marks, and the middle of each band sits close to 9.5 times its grade point: the 91–100 band (grade point 10) is centred near 95.5, against 9.5 × 10 = 95, and the 81–90 band (grade point 9) near 85.5, against exactly 85.5. CBSE therefore publishes 9.5 as the multiplier for an approximate percentage. It is an approximation, not an exact mark.

How do I convert a 10-point CGPA to percentage?

Multiply by the formula your board or university publishes. For CBSE it is CGPA × 9.5, so 8.2 becomes 77.9%. Anna University and the plain 10-point standard use CGPA × 10 (82%), VTU uses (CGPA − 0.75) × 10 (74.5%) and Mumbai University is commonly given as 7.1 × CGPA + 11 (69.22%). The comparison table on this page shows all four for every CGPA from 6.0 to 10.0.

What is the Mumbai University CGPA to percentage formula?

The formula commonly cited for Mumbai University's 10-point CGPA is percentage = 7.1 × CGPA + 11, so a CGPA of 8 is 67.8%. Schemes and years differ, so confirm it against the circular for your own course before using it on an application.

What is the VTU formula to convert CGPA to percentage?

VTU converts its 10-point CGPA with percentage = (CGPA − 0.75) × 10. A CGPA of 8.2 gives (8.2 − 0.75) × 10 = 74.5%.

Is multiplying by 9.5 correct for my university?

Only if your university publishes it. The 9.5 multiplier is the one CBSE uses for its own grades. Many universities set their own formula, so check your institution's rules or ask the exam office.

How do I convert a 4.0 GPA to a percentage?

The 4-point option uses a simple linear scale: GPA ÷ 4 × 100, so 3.5 becomes 87.5%. That is a convenience calculation, not an official standard, and many US schools do not convert GPA to a percentage at all.

Can I convert a percentage back to CGPA?

Yes. Switch to % → CGPA and the calculator inverts the chosen formula, for example 77.9 ÷ 9.5 = 8.2 for CBSE style. If the answer lands above the top of the scale, such as 100% under the 9.5 multiplier (10.53), it is flagged because no real grade corresponds to it.